What is megapascal?
A megapascal is a pressure unit equal to one million pascals. It is used for measuring high pressures in industrial hydraulics, structural materials testing, and deep-sea and geological applications.
Real-world uses
Megapascals are used for concrete compressive strength (typical structural concrete is 20–40 MPa), steel tensile strength (mild steel ≈ 250 MPa yield), and hydraulic system pressures. Geologists use MPa for rock stress and tectonic pressure at depth.
History
The megapascal became a standard engineering unit with the global adoption of SI. It provides a convenient scale for material strength and high-pressure applications, replacing older units like kgf/cm² and ksi (kilopounds per square inch) in most countries.
Common mistakes
Confusing MPa with kPa—they differ by a factor of 1,000. Specifying concrete strength as 30 kPa instead of 30 MPa would describe an impossibly weak material. Also, 1 MPa = 1 N/mm², a useful equivalence often forgotten.
What is bar?
A bar is a pressure unit approximately equal to standard atmospheric pressure, or 100,000 pascals. It is widely used in meteorology, hydraulics, diving equipment, and industrial pressure gauges.
Real-world uses
Bars are widely used in European tyre pressure specifications, compressed gas cylinder ratings, scuba diving depth gauges, and industrial process controls. Espresso machines operate at 9–15 bar. Atmospheric pressure is approximately 1.013 bar.
History
The bar was introduced by Norwegian meteorologist Vilhelm Bjerknes in 1909, derived from the Greek word "baros" meaning weight. Though not an SI unit, it is widely accepted in industry and was retained in the EU Directive on units of measurement.
Common mistakes
Confusing bar with atm—they are close (1 atm ≈ 1.01325 bar) but not identical. Also, gauge pressure (barg) versus absolute pressure (bara) is often mixed up; gauge pressure reads zero at atmospheric pressure.
When is this conversion used?
Tyre pressure gauges, HVAC systems, and industrial equipment may use different pressure units depending on the manufacturer and region. Converting between psi, bar, and kPa is common in automotive and engineering work.
Worked examples
1 megapascal = 10 bar
1 bar = 100,000 pascal
How to convert megapascal to bar
To convert megapascal to bar, multiply the value by 10.
To convert bar back to megapascal, multiply by 0.1.
Measurement standards
The pascal (Pa) is the SI derived unit of pressure, defined as one newton per square metre. The World Meteorological Organization mandates the hectopascal (hPa) for atmospheric pressure reporting in aviation and weather services.
Did you know?
The pressure at the bottom of the Mariana Trench, nearly 11 km deep, exceeds 1,086 bar — over a thousand times atmospheric pressure. At this depth, water is compressed by about 5%, making it measurably denser than at the surface.
Quick reference: megapascal to bar
| megapascal | bar |
|---|---|
| 0.1 | 1 |
| 0.5 | 5 |
| 1 | 10 |
| 2 | 20 |
| 5 | 50 |
| 10 | 100 |
| 25 | 250 |
| 50 | 500 |
| 100 | 1,000 |
| 250 | 2,500 |
| 500 | 5,000 |
| 1,000 | 10,000 |
Common values
| megapascal | bar | |
|---|---|---|
| Car tyre | 0.22 megapascal | 2.2 bar |
| Standard atmosphere | 0.101325 megapascal | 1.01325 bar |
| Blood pressure (systolic) | 0.016 megapascal | 0.16 bar |
| Deep-sea submersible | 110 megapascal | 1,100 bar |
| Bicycle tyre | 0.62 megapascal | 6.2 bar |