What is megapascal?
A megapascal is a pressure unit equal to one million pascals. It is used for measuring high pressures in industrial hydraulics, structural materials testing, and deep-sea and geological applications.
Real-world uses
Megapascals are used for concrete compressive strength (typical structural concrete is 20–40 MPa), steel tensile strength (mild steel ≈ 250 MPa yield), and hydraulic system pressures. Geologists use MPa for rock stress and tectonic pressure at depth.
History
The megapascal became a standard engineering unit with the global adoption of SI. It provides a convenient scale for material strength and high-pressure applications, replacing older units like kgf/cm² and ksi (kilopounds per square inch) in most countries.
Common mistakes
Confusing MPa with kPa—they differ by a factor of 1,000. Specifying concrete strength as 30 kPa instead of 30 MPa would describe an impossibly weak material. Also, 1 MPa = 1 N/mm², a useful equivalence often forgotten.
What is hectopascal?
A hectopascal is a pressure unit equal to 100 pascals, numerically identical to the millibar. It is the standard unit for atmospheric pressure reports in modern meteorology and aviation weather data.
Real-world uses
Hectopascals are the modern meteorological standard for atmospheric pressure reporting, used by the World Meteorological Organization and most national weather services. Standard atmospheric pressure is 1013.25 hPa. Altimeter settings in aviation outside the US use hPa (QNH).
History
The hectopascal was promoted by the WMO beginning in 1982 as a replacement for the millibar, aligning meteorology with the SI system. Since 1 hPa equals exactly 1 mbar, the transition required no changes to numerical readings or instruments.
Common mistakes
Not realizing that 1 hPa = 1 mbar exactly. The switch from millibars to hectopascals changed only the name, not the numerical values. Also, some people confuse hPa with kPa; 1 kPa = 10 hPa.
When is this conversion used?
Converting megapascal to hectopascal is useful in the pressure domain when comparing values across different measurement standards or applying formulas that require a specific unit.
Worked examples
1 megapascal = 10,000 hectopascal
1 hectopascal = 100 pascal
How to convert megapascal to hectopascal
To convert megapascal to hectopascal, multiply the value by 10,000.
To convert hectopascal back to megapascal, multiply by 0.0001.
Measurement standards
The pascal (Pa) is the SI derived unit of pressure, defined as one newton per square metre. The World Meteorological Organization mandates the hectopascal (hPa) for atmospheric pressure reporting in aviation and weather services.
Did you know?
The pressure at the bottom of the Mariana Trench, nearly 11 km deep, exceeds 1,086 bar — over a thousand times atmospheric pressure. At this depth, water is compressed by about 5%, making it measurably denser than at the surface.
Quick reference: megapascal to hectopascal
| megapascal | hectopascal |
|---|---|
| 0.1 | 1,000 |
| 0.5 | 5,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 250 | 2,500,000 |
| 500 | 5,000,000 |
| 1,000 | 10,000,000 |
Common values
| megapascal | hectopascal | |
|---|---|---|
| Car tyre | 0.22 megapascal | 2,200 hectopascal |
| Standard atmosphere | 0.101325 megapascal | 1,013.25 hectopascal |
| Blood pressure (systolic) | 0.016 megapascal | 160 hectopascal |
| Deep-sea submersible | 110 megapascal | 1,100,000 hectopascal |
| Bicycle tyre | 0.62 megapascal | 6,200 hectopascal |